Thermal modularity: comfortable down to 0°C. Removable inner fleece layer.
Fabric with 2,000 mm rated coating & taped seams to protect you from 2h shower.
Reinforced shoulders to withstand backpack rubbing.
1 hidden, compartmented pocket to keep your belongings safe + 2 hand pockets.
Cuff adjustment system to tighten them as needed.
This jacket weighs approximately 1.3 kg in size L
3-in-1 to adapt to all situations
With the "3-in-1" system, the jacket will be ideal for cold conditions (up to -1°C) and for hot weather trips when you can leave the inner layer at home, taking only the rain coat.
You can also use the fleece on its own as a mid layer over a t-shirt.
3 options in one jacket!
The security of your belongings: THE priority!
When backpacking, what could be worse than losing your passport or getting your phone stolen?
In order to prevent this so that you can enjoy your experience with total peace of mind, we have added a large discreet and compartmented secret pocket on the chest.
You can keep all your belongings in one secure place.
There is even a snap hook to attach your keys and not lose them.
We have added reflective tabs on the cuffs.
WARNING, these parts are not standardised, they are not PPE (PERSONAL PROTECTIVE EQUIPMENT) and therefore do not guarantee safety or protection.
When you want, you can turn the tightening tab around the wrist as necessary to uncover the reflective zones.
We carry out laboratory tests on our fabrics, according to different criteria:
Resistance to abrasion, to mimic the rubbing of backpack straps.
We carry out a standardised Martindale rub test, during which the jacket's fabric is rubbed against another fabric. The aim is to control the wear limits of the fabric and when pilling begins. The jacket passes the test easily as it reaches 20,000 cycles on the Martindale, above the average for other jackets on the market.
Resistance to tearing
The jacket has also been subjected to single rip tearing tests. The aim is to mimic in a laboratory the effect of your jacket snagging on something outdoors and being ripped. Through this test protocol, we check that once it is ripped, the fabric does not continue to tear and still protects you for years to come.
Did you know that your TRAVEL 100 3-in-1 JACKET is eco-designed?
The jacket linings are DOPE DYED: this means that the dyeing process is done in bulk before the thread is spun. It reduces the environmental impact, particularly water consumption. The usual dyeing process uses a lot of water and by using this technique we avoid over-use.
In addition, the net inner fabric called “mesh” is made from recycled polyester to reduce the environmental impact.