Technical dimensions
Max. usage size: 220 cm
Min. usage size: 160 cm
Disassembled size: 60 cm
Weight: 1.100 kg
Shaft diameter: 3 cm
Blade surface: 540 cm² (83 inches²)
Paddle width: 18.5 cm (7.3”)
Ideal for travelling
This paddle has been designed to perfectly complement the S/M/L compact stand up paddle set
Incredibly compact, it fits along the length of the compact stand up paddle bag or in a travel case.
Once disassembled, its hanging system allows you to never lose or forget a part.
Dismantling - Assembling
DISASSEMBLY:
Hold the product in your hand.
Slide the two tubes along the blade following the 2 arrows
ASSEMBLY:
Hold the blade in your hand.
Assemble number 1 with number 1 and number 2 with number 2.
Settings
The paddle with the widest range of adjustment (160-220 cm)!
The paddle should be adjusted to around 15-20 cm higher than your head:
E.g.: a person who is 1.90 m tall adjusts to approximately 2.10 m
E.g.: for a person 1.50 m tall, adjusts to approximately 1.70 m
To adjust the paddle, open the latch, pull the handle to the desired length, then close the latch.
If the size is not sufficient, use the lower setting.
If it is not fastened tightly enough, open the latch and tighten the metal screw.
How to maintain your paddle
After a stand up paddleboarding session, it is important to rinse your paddle with clean water.
To avoid salt crystals building up on the tightening bolt, the push pin and inner tubes, rinse the paddle in warm water. So you increase the lifespan of your paddle.
Directions for use
The paddle is your means of travel and therefore of returning safely.
Never leave your paddle floating in the water and risk losing it as it is not designed to float for more than one minute.
If you take a break, leave the paddle on the board, attached to the elastics.
