DECATHLON
26x1.7/2.2 48 mm Schrader Valve Inner Tube
Designed for changing the inner tube of your 26 inch diameter tyre, with a 1.70 to 2.20 section, and with a 48 mm Schrader valve.
Need to replace your inner tube? Our 26" Schrader valve inner tube is suitable for mountain, hybrid and city bikes.Easy assembly and removal using a tyre lever.
ID 8549114
BENEFITS
Compatibility
26x1.7 to 26x2.2 tyres. ETRTO 44/57 - 559
Waterproof
Optimised composition to ensure your inner tube has a good seal.
TECHNICAL INFORMATIONS
Choosing an inner tube:
To maintain your bike properly, it is important to know the exact dimensions of your tyres.This information can be found on the sidewall of the tyre (diameter and width).For example, 26x1.90 means a tyre with a diameter of 26 inches and a width of 1.90 inches.
On the side, you will also find the dimensions in mm according to the ETRTO standard.
For example, 50-559 indicates a tyre that is 50 mm wide with an inner diameter of 559 mm (approximately 26x2.00).
To remove your inner tube, the tools you'll need are:
For best results, use B’TWIN tyre levers when replacing the inner tube.
Checks to carry out before installing an inner tube:
Check the overall condition of your tyre, remove any foreign objects and check that the rim is not cracked or misaligned.A damaged rim can also puncture the inner tube.
How to change an inner tube:
Watch our tutorial before installation.A slightly inflated inner tube makes insertion easier.Position the valve correctly, insert the inner tube into the tyre, then into the rim, taking care not to pinch it.
Fitting a tyre:
For pinch-free installation:start at the valve, finish at the opposite end, and never use hard tools.
Inflating a tyre:
Use the correct pressure (indicated on the sidewall).When inflating, visually check that the tyre is correctly positioned.
Pro advice:
Remember to check your tyre pressure to avoid punctures and ensure good road grip.
Find more information available with this link:
https://conseilsport.decathlon.fr/comment-changer-sa-chambre-a-air
Weight:
204g
COMPOSITION
composition
Main part: 100.0% Rubber - Synthetic; Valve: 100.0% Brass; [EN] Cover: 100.0% Polypropylene (PP)
Tips for storage and maintenance
Storage tips
Carry your inner tubes in a container to protect them from getting punctured (tool drum, original packaging…).
Restrictions on use
Take care not to pinch the inner tube when mounting it.
TESTS AND WARRANTY
Test product
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.
Warranty
2 Years