QUECHUA
Men’s Waterproof Hiking Boots NH100 Low WP
Our hiker-designers have designed these NH100 WP waterproof boots for your occasional hikes on the plains, in forests and along the coast in rainy weather
Trek through mud and puddles with ease. These waterproof low-tops feature breathable membranes and rubber soles, plus extra toe protection and sturdy grip. Lace up and hit the trails.
ID 8504220
BENEFITS
Anatomic design
Synthetic detailing on the front foot for resistance against abrasion in nature
Lightweight
Each shoe only weights 435 g for UK size 7
Abrasion resistance
Synthetic toe bumper at the front of the foot to protect you from stones
Traction
Sole design and 4 mm spike clears mud easily
Grip
Sole composition & design encourages grip on walking trails
Cushioning
Soft, honeycomb rubber sole to ensure your foot rolls smoothly.
Fitting comfort
Breathable 5 mm insole | Ankle collar: comfortable foam
Waterproof
Waterproof, breathable membrane | Tested during a 2-hour walk in the rain
TECHNICAL INFORMATIONS
Resistant soles for walking trails
The sole’s design is the result of long research carried out in our labs. It is composed of a specific rubber formula which optimises grip and traction. We are systematically looking for the best compromise for walking on soft (e.g. forest paths) and stony (e.g. coastal paths) hiking trails.
When used on roads, this can lead to the premature wear of your boots and cause discomfort. They are not suitable for mountain walking.
Tested for optimal durability
Laboratory tests were conducted to test the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing. These tests allow us to improve the quality of our products and prevent premature wear of our hiking shoes.
Waterproof boots for 2 hours of hiking in rainy weather
The NH100 Low-rise WP boots are waterproof for two hours of hiking.
They have been laboratory tested for 2,000 flexes. Once the boots have dried out, they are waterproof once again.
During the waterproofness test, we test 3 levels of waterproofness:
- 2,000 flexes, approx. 2 hours hiking
- 4,000 flexes, approx. 4 hours hiking
- 8,000 flexes, approx. 8 hours hiking
How do we test the waterproofing of your shoes?
Laboratory- and field- tested, these shoes have a membrane to ensure optimal waterproofing and breathability. First, the shoe is immersed in water while internal air pressure is applied to check that no bubbles form on the surface of the footwear. Next, shoes are fitted to a mechanical arm that simulates walking and half immersed in water so we can test that the inside remains perfectly dry.
How to choose the size of my walking boots?
Try on both shoes, standing up, with the socks worn for hiking. Try on several models or sizes if necessary. Check two comfort points:
- the heel seating
- the front of the foot on a downward slope
Avoid any pressure points when fitting. Feel free to walk around to test the comfort and support. Gradually start using you shoes during your first few hiking trips to break them in.
Which pair of socks are suitable for Quechua NH150 waterproof boots?
These shoes are slightly breathable, but not enough to evacuate all humidity created by your perspiration. We advise you to choose Hike 100 Mid socks: they contain moisture-absorbing cotton and have a reverse terry-knit construction under the sock that wicks moisture away from your foot. They are also high enough to protect your ankle from the shoe. It is an excellent combination to reduce the chance of blisters.
COMPOSITION
composition
Upper of: 5.0% Elastane, 50.0% Polyamide (PA), 30.0% Polyurethane (PU), 15.0% Polyethylene Terephtalate (PET); Outer sole of: 100.0% Rubber - Butadiene Rubber (BR); Lining and sock of: 30.0% Polyurethane (PU), 70.0% Polyethylene Terephtalate (PET)
Tips for storage and maintenance
Storage tips
We recommend you store your boots in a dry, dark and, if possible, ventilated place away from any heat source.
Restrictions on use
Do not use on hilly terrain or on tarmac.
TESTS AND WARRANTY
Test product
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for co-designing high-quality products for your hikes and giving you access to all our expertise.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested out in the heart of nature in the type of conditions you may encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.