DECATHLON
Disc Brake Pads - Compatible with Shimano Deore/Tektro Semi-Metallic
Designed for replacing your disc brake pads.
Part-metal pads, the most versatile
Compatible with Shimano, Tektro, TRP and the Decathlon Triban RC250 Disc model bikes
ID 8325111
BENEFITS
Compatibility
Shimano (ref: B01S, B03S, B05S), TEKTRO and TRP
Brake control
Guarantees steady braking.
Abrasion resistance
Sintered material with a high friction index. 2x longer lasting
Braking power
Effective even in water and mud.
Instructions
DownloadTECHNICAL INFORMATIONS
BEDDING IN YOUR BIKE'S BRAKE PADS IS ABSOLUTELY ESSENTIAL FOR EFFECTIVE BRAKING.
This involves gradually heating up the brake pads and rotors to create an even contact surface.
Before bedding in your brakes, it's important to do the following:
- Clean your brake rotors. If you change the pad, it's recommended that you also change the rotors.
- Make sure you have the right equipment. Wear a helmet and fix a bike computer or bike GPS to your bike.
- Choose a safe place. Bed in your brakes on a flat, dry road with no obstacles.
THE BEDDING-IN PROCEDURE INVOLVES GRADUALLY BRAKING SEVERAL TIMES IN A ROW, FROM INCREASING SPEEDS.
It's important to alternate between the front and rear brakes, and to work through the following steps:
Step 1: Ride at 15 km/h and gradually brake to slow yourself to 5 km/h, 10 times in a row.
Step 2: Ride at 20 km/h and gradually brake to slow yourself to 5 km/h, 10 times in a row.
Step 3: Ride at 25 km/h and gradually brake to slow yourself to 5 km/h, 10 times in a row.
Between each step, release the brakes and ride a few dozen metres to let the rotor and pads cool down.
A FEW EXTRA TIPS FOR BEDDING IN YOUR BRAKES:
- Use one brake at a time so that you don't overheat the pads.
- Ride on a flat surface to avoid jolts.
- Don't brake harshly.
- Be patient. Bedding in can take up to 30 minutes.
- If you notice a rainbow mark on your rotors or if your braking isn't very effective, this means that your brakes are "glazed". If this happens, please visit a Decathlon workshop.
Compatibility
Tektro: HD-M740 / M730 / M520 / M521 / M510 / M500 / M501/ HD-M290 / M291 / M285 / M286 / HD-T710 / T520 / T530 / T290 / T285 / T525 / MD-M500 / M300 / M280 / MD-C510 / C400
Tektro series:Aquila / Auriga Comp(ws) / Auriga E-Comp / Draco(ws) / Dorado, Orion, Auriga Pro / TKD Btwin
Shimano: BR-M575, BR-M495, BR-M486, BR-M485, BR-M445, BR-C501, BR-M525, BR-M495, BR-M475, BR-M465, BR-M416, BR-M416A, BR-M415, BR-M375
B'Twin: TKD 32, TKD 20, TKD 50, TKD 68
TRP
contents
1 pair of brake pads
1 spring
metal pin not included
COMPOSITION
composition
Main part: 47.94% Resin, 4.12% [EN] Stainless Steel, 47.94% [EN] Steel
Tips for storage and maintenance
Restrictions on use
Be careful not to splash with oil, grease, spray, etc.
TESTS AND WARRANTY
Test product
This model has been tested and approved in the lab
Warranty
2 Years