DECATHLON
Bike Inner Tube Puncture Resistant Liquid Sealant
This liquid sealant helps you to block punctures smaller than 3 mm in diameter.
Bike inner tube puncture resistant liquid sealant.
ID 8796822
BENEFITS
Compatibility
Schrader valve inner tubes only.
Easy assembly / dismantling
The valve remover built into the cap makes it easy to position it correctly.
Visual efficiency
Carry on riding after the puncture to allow the liquid to seal.
TECHNICAL INFORMATIONS
Capacity:
250 ml bottle.
Protects your 2 inner tubes.
Notes:
Does not repair holes on the sidewalls or holes over 3 mm in diameter.
Not suitable for inner tubes with a Presta valve (small valve) or for Tubeless tyres.
Use
1. Vigorously shake the bottle
2. Take out the tool to remove the core from your inner tube (located in the cap)
3. Remove the core and let your tyre inflate
4. Connect the tube to the base of the valve, ensuring there is a good seal
5. Empty half of the bottle into the inner tube
6. Put the valve core back
7. Turn the wheel to distribute the product
8. Inflate your tyre to the recommended pressure and repeat this process for the other wheel
Warnings:
Avoid contact with eyes.
Do not drink.
Keep out of reach of children.
Tip from the pros:
Using preventative product will help prevent future punctures.
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Keep away from freezing temperatures.Store indoors and away from direct sunlight. Keep packaging closed when not in use.
Restrictions on use
Not compatible with tubeless or tubeless ready tyres.
TESTS AND WARRANTY
Warranty
2 Years