FORCLAZ
Water bag with isothermal tube - 2 litres - MT500
Our mountain trekking team has designed this 2-litre water bag for the trekker who wants to drink in any weather.
Get your hydration set-up sorted with this flexible water bladder, designed for year-round treks. The isothermal tube helps to limit temperature variations, keeping you comfortable while on the move.
ID 8644118
BENEFITS
Capacity
2 litres, ideal for staying hydrated all day.
Easy maintenance
Sliding ruler top to fully open bladder and facilitate cleaning.
Ease of use
Mouthpiece with on/off switch, large opening for easy filling.
Mouth comfort
Comfortable silicon mouthpiece, at 45° angle to make it easy to put in mouth.
Isothermal
Insulated sheath slows down & limits temperature variations (warmth / freezing)
TECHNICAL INFORMATIONS
Directions for use
Use water at temperatures between -20°C and +40°C. Do not use: alcohol, fats (dairy products, oils...). In temperatures below 0°C, blow into the pipette after use to flush out the water and reduce the risk of freezing in the pipette and tube.
If the noise of the water shaking around in your backpack bothers you, empty the air contained in your water bladder by turning it upside down and directing air bubbles towards the tube, while sucking it out.
Functions
Removable sliding ruler top to fully open bladder and facilitate cleaning.
Sliding seal has hooks so you can hang water pouch in compatible bags.
Mouthpiece with an on / off position (turn the grey part of the teat) to prevent untimely water loss during your outings. To drink you need to place the mouthpiece in the “on” position then suck, pulling on the mouthpiece with the mouth.
Thermal properties / isothermal
The tube on your kit is insulated with a vulcanised expanded thermo-plastic elastomer (TPE-V) sheath and the pipette is protected by a polypropylene (PP) cap. So the drinking water IN THE TUBE will be colder than if there was no insulation and won't freeze so fast in the winter.
The insulation of the sheath doesn't influence the temperature of the water in the water bladder.
Thermal properties (next)
This isothermal product is tested according to the following protocol: the isothermal tube and classic tube are filled with water at room temperature then placed in an environmental room at -15°C. We then measure the time it takes for the water in the tube to get down to 0°C, and then freeze. The thermal performance of the insulated pipette increases the time the water takes to reach 0°C by 27% compared to a classic tube.
Care tips
Nettoyer la poche et le tuyau après chaque utilisation, avec un liquide vaisselle classique. You can use B-TWIN brush + drying hanger kit (code: 631585) particularly if you've had a sugary drink. Do not leave drink in water bladder for longer than 24 hours. Do not put in the dishwasher or microwave.
First use
Rinse the entire product 3 times with clear water before using for the first time.
Weight and dimensions
Volume: 2 litres
Product size: 18 cm x 37 cm
Total weight:
Tube and mouthpiece sizes: Ø 1.2 cm x 100 cm
Tube and mouthpiece weight: 85g
COMPOSITION
composition
[EN] Tube: 83.0% Thermoplastic polyurethane (TPU), 17.0% Rubber - Ethylene Propylene Diene Monomer (EPDM); Film: 100.0% Thermoplastic polyurethane (TPU); Handle: 100.0% Acrylonitrile butadiene styrene (ABS); Sliding bar: 100.0% Thermoplastic polyurethane (TPU); Cap: 20.0% Styrene Ethylene Butadiene Styrene (SEBS), 80.0% Polypropylene (PP) - Recycled; Bottleneck/Teat: 100.0% Silicone; Film/Tube Connector: 100.0% Thermoplastic polyurethane (TPU); Tube/Valve Connector: 100.0% Polypropylene (PP); On/Off System: 100.0% Polypropylene (PP)
Tips for storage and maintenance
Storage tips
Wash and dry before storing away. Store in a clean, dry place. You can also store your water pouch in the freezer to prevent mould growth.
Restrictions on use
Only suitable for sports use and for ages 6 and up.
TESTS AND WARRANTY
Warranty
2 Years