ITIWIT
12 V/15 A electric pump for inflatable SUP and kayaks
Our team recommends this product to easily and quickly inflate your inflatable stand-up paddle boards to high pressures of up to 15 psi
Electric pump works connected to a 12V-15A outlet and provides up to 15 PSI (1 bar) of pressure on demand. Can be used to effortlessly inflate low-pressure kayaks and high-pressure SUP boards.
ID 8387582
BENEFITS
Ease of use
Set the pressure, start the pump.
Lightweight
Weight: 1.2 kg.
Power
Inflates a 300 L SUP to 15 PSI in approximately 12 minutes.
Flexibility
Has 1 Boston fitting, 1 mini-Boston fitting and 1 high-pressure fitting.
Parameter measurement
Built-in 0-15 psi pressure gauge.
Instructions
DownloadTECHNICAL INFORMATIONS
Connection
Works plugged into a 12V cigarette lighter socket.
WARNING: The car battery must provide at minimum 15A.
Provides pressure of up to 15 PSI (1 bar).
Enables you to inflate low-pressure kayaks (1 to 2 PSI) and stand-up paddle boards (10 to 15 PSI).
SAFETY CONTROL
Make sure that the cigarette lighter plug is fully pushed in to avoid overheating caused by bad electrical contact.
Operation
1/ Connect the pump to the cigar lighter with the car engine running.
2/ Connect the pump hose to the SUP
3/ Select the psi/bar/hpa mode with the arrow button
3/ Pre-set the recommended pressure with the +/- buttons
4/ Start Press ON to inflate.
The pump stops at the set pressure.
COMPOSITION
composition
Motor: 100.0% [EN] Stainless Steel; Cable: 100.0% [EN] 1.2-Benzisothiazole-3(2H)-One; Main part: 100.0% PCBA
Tips for storage and maintenance
Storage tips
Store in a dry place. Avoid dust and sand.
Restrictions on use
Inflate to the pressure recommended by the manufacturer.
TESTS AND WARRANTY
Warranty
2 Years
Parts guarantee
Warranty: 2 years