QUECHUA
0.4 L Stainless Steel Isothermal Flask with Cup for Hiking - Blue
Need to keep your drinks hot or cold for several hours? Our designers have developed this solid, highly insulating bottle.
This innovative bottle keeps drinks hot or cold for several hours with its solid, highly insulating design. The cap opens with a quarter turn for easy use while on the move, and a beaker is included.
ID 8734555
BENEFITS
Easy maintenance
Easy to clean thanks to the screw top. Stainless steel internal wall.
Ease of use
Pour out by partially unscrewing the cap. Beaker included. S/steel
Robustness
Double stainless steel int. wall con.18/8 (304) with an air gap between the two.
Isothermal
Starting temperature 95°C: 76°C after 6 hrs, 63° after 12 hrs, 48° after 24 hrs.
Repair
Insulated screw cap available separately (Reference 8615545).
TECHNICAL INFORMATIONS
Advice for optimising the performance of your isothermal bottle
Fill the bottle with boiling water for 5 minutes. Then replace the water with your beverage. Close bottle.
The fuller the bottle is, the better it is at keeping its contents hot or cold.
Functions
Partially unscrew the cap to easily pour the liquid and avoid fully opening the cap which reduces the isothermal performance. The included beaker screws onto the bottle making it easy to carry.
Care tips
Wash by hand then rinse with clear water and let to dry with the cap open. The bottle may be placed in the dishwasher, however the cap and beaker may not be placed in the dishwasher.
First use
Rinse the entire product 3 times with clear water before using for the first time.
Materials and regulations
Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.
Weight and dimensions
Volume: 0.4 litre
Dimensions : Ø 7 cm x 22.4 cm
Weight: 290 grams
Available in : 0.4L / 0.7L / 1L / 1.5L
Don't throw away, repair
Our products will join you on your mountain walks. As you gradually progress, they will age, certain parts can get worn, broken or lost. To help repair your flasks, our tops are available separately. Our environmental approach at Quechua also supports making these parts available to you.
Product design: our expertise
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
COMPOSITION
composition
Bottle/Body: 100.0% [EN] Stainless Steel; Cap: 75.0% Polypropylene (PP), 25.0% [EN] Stainless Steel; Joint/Gasket: 100.0% Silicone
Tips for storage and maintenance
Storage tips
Wash and dry before storing away. Store in a clean, dry place.
Restrictions on use
No alcohol. Do not put in a microwave oven or freezer.
TESTS AND WARRANTY
Test product
Our isothermal products are tested using the same protocol: Water at 95°C is placed in the product, which is then closed. We then measure the temperature drop of the water after 6, 12 and 24 hours.
Warranty
5 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.