Hide Filters
Filters 0
Sort by :
Filters 0
29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
  • 29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
  • 29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
  • 29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
  • 29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
  • 29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
29x1.9/2.5 mm Presta Valve Inner Tube 48 mm

DECATHLON

8641817

29x1.9/2.5 mm Presta Valve Inner Tube 48 mm

KES690.00
VAT included
  • 29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
  • 29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
  • 29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
  • 29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
  • 29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
29x1.9/2.5 mm Presta Valve Inner Tube 48 mm
Size :
No Size
Not available online

Store Availability

This inner tube is compatible with 29" diameter tyres, with a cross-section ranging from 1.90 to 2.50 with a 48 mm Presta valve.

BENEFITS

Compatibility

29-inch diameter tyres, 1.90 to 2.50 cross-section. ETRTO 47/64 - 622

Waterproof

Optimised composition to ensure your inner tube has a good seal.

TECHNICAL INFORMATIONS

How to choose your inner tube

Check all the information indicated on the sidewall of the tyre (diameter and width). For example, 29x1.90 means that the tyre is 29 inches in diameter and 1.90 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units.
For example, 50-622 means that the tyre is 50mm wide with a 622mm internal diameter (approx. 29x2.00).

Removing an inner tube

Remove the old inner tube using B'Twin tyre levers

Checks to carry out before installing an inner tube

Check the condition of your tyre and replace it if necessary.
Make sure no objects are lodged in the tyre.
Check the condition of your rim strip and that it is positioned correctly.
A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube

Mounting the inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.

Mounting the tyre

Start mounting the tyre at the valve.
Finish mounting the tyre opposite the valve to avoid pinching the inner tube.
Never mount your tyre with a tool or a tyre lever, as you risk pinching and puncturing the inner tube.

Inflating the tyre

Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tyre is in the correct position as you inflate it.

Tip from the pros

To avoid punctures from pinching and for the best tyre performance, we recommend that you check your tyres and inflate them to the suggested pressure before every ride.

Weight:

230 g