Trekking bladder - TREK 500 2 litres - Blue

ADULT

TREKKING SEVERAL DAYS
HIKING

2 Years

Use water at a temperature between -20°C and 40°C. Do not use with: alcohol, fatty products (dairy, oils, etc). In temperatures below 0°C, blow into the pipette after use to flush out the water and reduce the risk of freezing in the pipette and nozzle. If the noise of the water shaking around in the bladder bothers you, empty the air contained in your water bladder by turning it upside down and directing air bubbles towards the tube, while sucking it out.

Removable slider allows wide opening for easy filling and cleaning. This slider has holes so you can hang the water bladder on bags with hooks. Mouthpiece with an on / off position (turn the grey part of the teat) to prevent untimely water loss during your outings. To drink, you need to put the teat in the "ON" position then suck, deforming the teat with the mouth.

Clean the bladder and pipette after each use with standard dishwashing liquid. You can use the B-TWIN bottle brush and drying hanger kit (code: 631585) especially if you have used a sweet drink. Do not leave the drink over 24h in the water bladder. Do not put in the dishwasher or in the microwave.

Rinse the entire product 3 times with clean water before first use.

Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.

Volume: 2 litres Dimensions: 18cm x 37cm, tube 100cm Weight: 105 grams Available in: 1 L / 2 L / 3L

Wash and dry before storing. Store in a clean and dry place. You can also store your water bladder in the freezer to avoid the growth of mould.

Film : 70.0% Ethylene Vinyl Acetate, Film : 30.0% Polyethylene Air chamber : 100.0% Thermoplastic Polyurethane Handle : 100.0% Acrylonitrile Butadiene Styrene Sliding bar : 70.0% Ethylene Vinyl Acetate, Sliding bar : 30.0% Polyethylene Film/Tube connector : 70.0% Ethylene Vinyl Acetate, Film/Tube connector : 30.0% Polyethylene Tube/Valve connector : 100.0% Polyethylene On/Off system : 100.0% Polypropylene Teat : 100.0% Silicon

Use water at a temperature between -20°C and 40°C. Do not use with: alcohol, fatty products (dairy, oils, etc). In temperatures below 0°C, blow into the pipette after use to flush out the water and reduce the risk of freezing in the pipette and nozzle. If the noise of the water shaking around in the bladder bothers you, empty the air contained in your water bladder by turning it upside down and directing air bubbles towards the tube, while sucking it out.

Removable slider allows wide opening for easy filling and cleaning. This slider has holes so you can hang the water bladder on bags with hooks. Mouthpiece with an on / off position (turn the grey part of the teat) to prevent untimely water loss during your outings. To drink, you need to put the teat in the "ON" position then suck, deforming the teat with the mouth.

Clean the bladder and pipette after each use with standard dishwashing liquid. You can use the B-TWIN bottle brush and drying hanger kit (code: 631585) especially if you have used a sweet drink. Do not leave the drink over 24h in the water bladder. Do not put in the dishwasher or in the microwave.

Rinse the entire product 3 times with clean water before first use.

Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.

Volume: 2 litres Dimensions: 18cm x 37cm, tube 100cm Weight: 105 grams Available in: 1 L / 2 L / 3L